Concept Guide

Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command enables the SSH server and begins listening on a port. If a port is not specied, listening is on SSH
default port 22.
NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is enabled by default.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related Commands show ip ssh — displays the ssh information.
ip ssh server dns enable
Enable or disable the DNS in SSH server conguration to resolve hostname for host-based authenticatioin.
Syntax
ip ssh server dns enable
To disable the DNS in SSH server conguration, use the no ip ssh server dns enable command.
NOTE:
This command is applicable only in Full-Switch mode.
Defaults
Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13.0.1 Introduced on the MXL, C9010, S3048–ON, S3100 series, S4810, S4820T, S4048–ON,
S4048T-ON, S5000, S6000, S6000–ON, S6100–ON, S6010–ON, Z9500, Z9100–ON and
FN-IOM.
Usage Information
To disable the DNS in SSH server conguration, use the no ip ssh server dns enable command.
show crypto
Displays the public part of the SSH host-keys.
Syntax
show crypto key mypubkey {rsa | rsa1}
Parameters
Key Enter the keyword key to display the host public key.
mypubkey Enter the keyword mypubkey to display the host public key.
Security 1199