Concept Guide

Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–ON,
S4048–ON, MXL, C9010, S3100 series, and Z9100-ON.
Usage Information
• You can select one or more MAC algorithms from the list.
• Client-supported MAC list gets preference over the server-supported MAC list in selecting the MAC algorithm
for the SSH session.
• When the MAC (-m) option is used with the SSH CLI, it overrides the congured or default MAC list.
• When FIPS is enabled or disabled, the client MACs get default conguration.
ip ssh password-authentication
Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication enable command.
Parameters
enable Enter the keyword enable to enable password-authentication for the SSH server.
Defaults Enabled
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+ password
fallback order as congured.
ip ssh rhostsle
Specify the rhost le used for host-based authorization.
Syntax
ip ssh rhostsfile {WORD}
Parameters
WORD Enter the rhost le name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
1194 Security