Concept Guide
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add or
delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add or
delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3 system
dened roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced on the MXL.
Related Commands userrole
rate-limit
Congure NAS to allow or reject RADIUS dynamic authorization (DA) packets based on the congurable rate limit value.
Syntax
rate-limit packets per minute
To undo the conguration, enter the no rate-limit command.
Defaults 30 packets per minute.
Parameters
packet per minute Enter the number of packets that you want processed per minute. The range is between
10 to 60 packets per minute.
Command Modes
• CONF-DYNAMIC-AUTH
Usage Information
• Packets are dropped after number of packets reaches the congured rate-limit.
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Security 1181