Concept Guide

Version Description
9.5(0.0) Introduced the support for roles on the MXL 10/40GbE Switch.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To view the dened user names, use the show running-config user command.
Related Commands
password — species a password for users on terminal lines.
show running-cong — views the current conguration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking Operating System (OS).
client
Congures trusted DAC clients.
Syntax
client {ipv4-addr | ipv6-addr | hostname} [vrf vrf-name] [key [encryption-type]
key]
To undo the DAC client conguration, enter the no client host command.
Defaults If VRF is not congured, default VRF is considered.
Parameters
ipv4–addr Enter the keyword ipv4–addr to specify the IPv4 address of the DAC.
ipv6–addr Enter the keyword ipv6–addr to specify the IPv6 address of the DAC.
hostname Enter the keyword hostname to enter the name of the host.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to associate a VRF with the
client.
key (Optional) Enter the keyword key to specify an encryption key.
encryption-type (Optional) Enter either 0 or 7 as the encryption type for the specied key. The options
are:
• 0 – implies that the key is not encrypted and is stored as clear text.
• 7 – implies that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and the dynamic
authorization client. The key can be up to 42 characters long.
Command Modes
• CONF-DYNAMIC-AUTH
Usage Information
• It is possible to congure more than one dynamic authorization clients Duplicate (ipv4-addr or ipv6-addr or
host-name) congurations are not allowed.
1170 Security