Concept Guide

Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
exec-banner
Enable the display of a text string when the user enters EXEC mode.
Syntax
exec-banner
To disable the banner on terminal lines, use the no exec-banner command.
Defaults Enabled on all lines (if congured, the banner appears).
Command Modes LINE
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Usage Information Optionally, use the banner exec command to create a text string that is displayed when you access EXEC
mode. This command toggles that display.
Related Commands
banner exec— congures a banner to display when entering EXEC mode.
line — enables and congures console and virtual terminal lines to the system.
access-class
Restrict incoming connections to a particular IP address in a dened IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name Enter the name of an established IP Standard ACL.
Defaults Not congured.
Command Modes LINE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
Security 1159