Concept Guide
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-authenticated
|| none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
name Dene a name for the list of authorization methods.
default Dene the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
aaa reauthenticate enable
Enable re-authentication of user whenever there is a change in the authenticators.
Syntax
aaa reauthenticate enable
To disable the re-authentication option, use the no aaa reauthenticate enable command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced this command.
Usage Information
When an operating system enables to change the user authenticators, the users might access resources and
perform tasks that they do not have authorization.
Security 1153