Concept Guide

show qos class-map
View the current class map information.
Syntax
show qos class-map [class-name]
Parameters
class-name (Optional) Enter the name of a congured class map.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show qos class-map
Class-map match-any CM
Match ip access-group ACL
Related Commands class-map — identies the class map.
show qos dcb-map
Display the DCB parameters congured in a specied DCB map.
Syntax
show qos dcb-map map-name
Parameters
map-name Displays the PFC and ETS parameters congured in the specied map.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O aggregator.
Usage Information
Use the show qos dcb-map command to display the enhanced transmission selection (ETS) and priority-based
ow control (PFC) parameters used to congure server-facing Ethernet ports.
Quality of Service (QoS) 1089