CLI Guide

rejected-sa Enter the keywords rejected-sa to clear the cache
source-active entries that are rejected because the RPF
check failed, an SA filter or limit is configured, the RP or
MSDP peer is unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while
adding the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL Switch .
clear ip msdp statistic
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected,
or local source-active entries.
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format
(A.B.C.D.).
rejected-sa Enter the keyword rejected-sa to clear the cache
source-active entries that are rejected because the RPF
check failed, an SA filter or limit is configured, the RP or
MSDP peer is unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while
adding the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
998
Multicast Source Discovery Protocol (MSDP)