CLI Guide

Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
shutdown-original Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit reset
Reset the MAC address learning-limit error-disabled state.
Syntax
mac learning-limit reset
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Layer 2
959