CLI Guide

Field Description
Utilization (In
Percent)
Traffic usage in percentage of the packets processed by the
port channel
Alarm State Indicates whether an alarm is generated if overutilization of
the port channel occurred. Possible values are Active and
Inactive
Interface Slot and port number, and the type of the member interface
of the port channel
Line Protocol Indicates whether the interface is administratively up or
down
Utilization (In
Percent)
Traffic usage in percentage of the packets processed by the
particular member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm
State - Inactive
Interface Line Protocol Utilization[In
Percent]
Te 0/5 Up 0
show port-channel-flow
Display an egress port in a given port-channel flow.
Syntax
show port-channel-flow port-channel number incoming-interface
interface { src-mac address dest-mac address {vlan vlanid |
ether-type }} [ src-ip address dest-ip address ] [ src-port
number dest-port number ]
Parameters
port-channel
number
Enter the keywords port-channel then the number of the
port channel to display flow information. The range is from
1 to 128.
incoming-
interface interface
Enter the keywords incoming-interface then the
interface type and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
src-mac address Enter the keywords src-mac then the MAC source address
in the nn:nn:nn:nn:nn:nn format.
dest-macaddress Enter the keywords dest-mac then the MAC destination
address in the nn:nn:nn:nn:nn:nn format.
952
Link Aggregation Control Protocol (LACP)