CLI Guide

Partner Admin: State BDFHJLMP Key 0 Priority 0
Oper: State BCEGIKNP Key 1 Priority 128
Dell#
Example (Sys-id)
Dell#show lacp 1 sys-id
Actor System ID: Priority 32768, Address 0001.e800.a12b
Partner System ID: Priority 32768, Address 0001.e801.45a5
Dell#
Example (Counter)
Dell#show lacp 1 counters
----------------------------------------------------
LACP PDU Marker PDU Unknown Illegal
Port Xmit Recv Xmit Recv Pkts Rx Pkts Rx
-----------------------------------------------------
TenGig 0/1 200 200 0 0 0 0
Dell#
Related
Commands
clear lacp counters — Clears the LACP counters.
show interfaces port-channel — Displays the information on configured Port
Channel groups.
show link-bundle-distribution port-channel
Display the traffic-handling and utilization of the member interfaces of the port channel.
Syntax
show link-bundle-distribution port-channel
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage Information The following table describes the output fields of this show command:
Field Description
Link-bundle
trigger threshold
Threshold value that is the checkpoint, exceeding which the
link bundle is marked as being overutilized and alarm is
generated
LAG bundle
number
Number of the LAG bundle
Link Aggregation Control Protocol (LACP)
951