CLI Guide

To remove the asset tag, use the no stack-unit unit-id Asset-tag ID

command.

Parameters

stack-unit unit-id Enter the keywords stack-unit then the unit-id to

assign a tag to the specific member. The range is from 0 to

Asset-tag ID Enter a unique asset-tag ID to assign to the stack member.

This option accepts a maximum of 10 characters, including

all special characters except double quotes. To include a

space in the asset-tag, enter a space within double quotes.

Defaults No asset-tag is assigned.

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Introduced on the M I/O Aggregator.

Commands

show system— Displays the current status of all stack members or a specific

member.

banner exec

Configure a message that is displayed when your enter EXEC mode.

Syntax

banner exec c line c

Parameters

c Enter the keywords banner exec, then enter a character

delineator, represented here by the letter c. Press ENTER.

line Enter a text string for your banner message ending the

message with your delineator. In the following example, the

delineator is a percent character (%); the banner message is

“testing, testing”.

Defaults No banner is displayed.

Command Modes CONFIGURATION

Supported Modes Full–Switch

Control and Monitoring