CLI Guide

Command Modes ROUTER ISIS
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will
be erased.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword * to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Intermediate System to Intermediate System (IS-IS)
887