CLI Guide

If the route map is not configured, the default is deny (to
drop all routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you enter the redistribute ospf process-id command without any
other parameters, the system redistributes all OSPF internal routes, external type 1
routes, and external type 2 routes.
router bgp
Enter ROUTER BGP mode to configure and enable BGP.
Syntax
router bgp as-number
To disable BGP, use the no router bgp as-number command.
Parameters
as-number Enter the AS number. The range is from 1 to 65535.
Defaults Not enabled.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show capture bgp-pdu neighbor
Display BGP packet capture information for an IPv6 address.
Syntax
show capture bgp-pdu neighbor ipv6-address
Parameters
ipv6-address Enter the IPv6 address (X:X:X:X::X) of a BGP neighbor.
Defaults
• EXEC
830
IPv6 Border Gateway Protocol (IPv6 BGP)