CLI Guide

route-map map-

name

(OPTIONAL) Enter the keywords route-map then the name

of a configured route map.

Defaults Not configured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information If you apply a route map to a BGP peer or neighbor with the neighbor default-

originate command configured, the software does not apply the set filters in the

route map to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).

Syntax

neighbor {ipv6-address | peer-group-name} description text

To delete a description, use the no neighbor {ipv6-address | peer-group-

name} description text command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

peer-group-name Enter the name of the peer group.

text Enter a continuous text string up to 80 characters.