CLI Guide

clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group-name Enter the peer group name to reset the BGP sessions within
that peer group.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip bgp ipv6 dampening
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information After you enter this command, the software deletes the history routes and returns
the suppressed routes to the active state.
clear ip bgp ipv6 flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Syntax
clear ip bgp ipv6 unicast flap-statistics [ipv6-address |
filter-list as-path-name | regexp regular-expression]
IPv6 Border Gateway Protocol (IPv6 BGP)
797