CLI Guide

immediately.*
*Proceed with caution ! *
**************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
0 Success
1 Success
2 Success
3 Not present
4 Not present
5 Not present
Power-cycling the unit(s).
Dell#
Example (NvRAM,
single unit)
Dell#restore factory-defaults stack-unit 1 nvram
**********************************************
*Warning - Restoring factory defaults will delete the existing
*
*persistent settings (stacking, fanout, etc.) *
*After restoration the unit(s) will be powercycled
immediately. *
*Proceed with caution ! *
**********************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success
Power-cycling the unit(s).
Dell#
show boot system
Displays information about boot images currently configured on the system.
Syntax
show boot system stack-unit {0-5 | all}
Parameters
0–5 Enter this information to display the boot image information
of only the entered stack-unit.
all Enter the keyword all to display the boot image
information of all the stack-units in the stack.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
76
File Management