CLI Guide

Defaults none
Command Modes CONF-CRYPTO-POLICY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
• This command is only available in the ipsec-manual model.
• The key information entry is associated with the global method for enabling
clear text or encrypted display in the running config.
show crypto ipsec transform-set
Display the transform set configuration.
Syntax
show crypto ipsec transform-set name
Parameters
name Enter the name of the transform set.
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.2) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf)#do show crypto ipsec transform-set
Transform-Set Name : ts1
Transform-Set refCnt : 0
AH Transform : md5
ESP Auth Transform :
ESP Encry Transform :
Dell(conf)#
show crypto ipsec policy
Display the crypto policy configuration.
Syntax
show crypto ipsec policy name
Internet Protocol Security (IPSec)
743