CLI Guide

Parameters
{ipv4-address } Enter the server IPv4 address (A.B.C.D).
name Enter a username to access the target server.
type Enter the password type:
• Enter 0 to enter an unencrypted password.
• Enter 7 to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
password Enter a password to access the target server.
Defaults Crash kernel files are uploaded to flash by default.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.4.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Because flash space may be limited, using this command ensures your entire crash
kernel files are uploaded successfully and completely. Only a single coredump
server can be configured. Configuration of a new coredump server over-writes any
previously configured server.
NOTE: You must disable logging coredump before you designate a new
server destination for your core dumps.
Related
Commands
logging coredump – disables the kernel coredump
pwd
Display the current working directory.
Syntax
pwd
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
File Management
73