CLI Guide

pipe-number
Enter the number of the Port-Pipe number. The range is
from 0 to 0.
ip-address mask
[longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only.
Enter the keyword longer-prefixes to view routes with a
common prefix.
detail
Enter the keyword detail to display the group index ID
used by the ecmp routes int he CAM.
member-info Enter the keyword member-info to display the group index
used by the ecmp, the number of egress ports (members)
for the ecmp, and the port details of each member. The
detail information under member-info will give the MAC
address, VLAN ID and gateway of every member port of the
ecmp.
summary (OPTIONAL) Enter the keyword summary to view a table
listing route prefixes and the total number routes which can
be entered in to CAM.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show ip fib stack-unit command shown in the
following example.
Field Description
Destination Displays the destination route of the index.
CG Displays 0.
V Displays a 1 if the entry is valid and a 0 otherwise.
C Displays the CPU bit.
1 indicates that a packet hitting this entry is forwarded to the
control processor, depending on Egress port.
IPv4 Routing
727