CLI Guide

10.10.10.10 0 0 1 1 0 00:00:00:00:00:00 3f01 CP
Dell#
Usage Information The following describes the show ip cam ecmp-group command shown in the
following example.
Field Description
Prefix Length Displays the prefix-length or mask for the IP address
configured on the linecard 0 port pipe 0.
Current Use Displays the number of routes currently configured for the
corresponding prefix or mask on the linecard 0 port pipe 0.
Initial Size Displays the CAM size the system allocates for the
corresponding mask. The system adjusts the CAM size if the
number of routes for the mask exceeds the initial allocation.
Example (ECMP-
Group)
Dell#show ip cam stack-unit 0 po 0 ecmp-group detail
Destination EC CG V C VId Mac-Addr Port ECMP Group-Index
----------------- -- -- - ----- ---------------- -------------
1.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 -
2.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 -
1.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
1.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 0
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 0
0.0.0.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
Dell#
Example (Member-
Info)
Dell#show ip cam stack-unit 0 po 0 ecmp-group member-info
detail
Group Index Member Count Mac-Addr Port VLan ID Gateway
----------- ------------------------------- ------------------
0 2 00:01:e8:8a:d6:58 Te 0/3
0 1.1.1.2
00:01:e8:8a:d6:58 Te 0/8 0
2.1.1.2
Dell#
show ip fib stack-unit
View all FIB entries.
Syntax
show ip fib stack-unit 0–5 [ip-address [mask] [longer-prefixes] |
summary]
Parameters
0–5 Enter the unit ID, from 0 to 5.
722
IPv4 Routing