CLI Guide

Field Description
Address Displays the IP addresses assigned to the host.
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam stack-unit
Display CAM entries.
Syntax
show ip cam stack-unit {0–5} [port-set {pipe-number} | {ip-
address mask [longer-prefixes]| detail | member-info | summary]
Parameters
0–5 Enter the stack-unit ID from 0 to 5
pipe-number Enter the number of the Port-Pipe number. The range is
from 0 to 0
ip-address mask
[longer-prefixes]
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only. Enter the keywords
longer-prefixes to view routes with a common prefix.
detail Enter the keyword detail to display the group index ID
used by the ecmp routes in the CAM.
member-info Enter the keywords member-info to display the group
index used by the ecmp, the number of egress ports
(members) for the ecmp, and the port details of each
member.
The detail information under member-info gives the MAC
address, VLAN ID, and gateway of every member port of the
ecmp.
720
IPv4 Routing