CLI Guide

Parameters
interface interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the Management interface, enter the keyword
managementethernet followed by the slot/port
information.
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage Information
The following describes the show arp command shown in the following example.
Row Heading Description
Protocol Displays the protocol type.
Address Displays the IP address of the ARP entry.
Age(min) Displays the age (in minutes) of the ARP entry.
Hardware Address Displays the MAC address associated with the ARP entry.
Interface Displays the first two letters of the interfaces type and the
slot/port associated with the ARP entry.
VLAN Displays the VLAN ID, if any, associated with the ARP entry.
CPU Lists which CPU the entries are stored on.
Example
Dell#show arp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
-------------------------------------------------------------
Internet 10.11.8.6 167 00:01:e9:45:00:03 Ma 0/0 - CP
Internet 10.11.68.14 124 00:01:e9:45:00:03 Ma 0/0 - CP
Internet 10.11.209.254 0 00:01:e9:45:00:03 Ma 0/0 - CP
Example (Private
VLAN)
NOTE: In this example, Line 1 shows community VLAN 200 (in primary VLAN
10) in a PVLAN. Line 2 shows primary VLAN 10.
Dell#show arp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
-----------------------------------------------------------------
Internet 5.5.5.1 - 00:01:e8:43:96:5e - Vl 10 pv 200 CP
IPv4 Routing
717