CLI Guide

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Usage Information You must include the colon (:) when entering this command.

CAUTION: This command deletes all files, including the startup

configuration file. So, after executing this command, consider saving the

running config as the startup config (use the write memory command or

copy run start command).

Commands

copy – copies the current configuration to either the startup-configuration file or

the terminal.

show file – displays the contents of a text file in the local filesystem.

show file-systems – displays information about the file systems on the system.

HTTP Copy via CLI

Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP,

and SCP (in the

hostip field).

Syntax

copy http://10.16.206.77/sample_file flash://sample_filecopy

flash://sample_file http://10.16.206.77/sample_file

You can copy from the server to the switch and vice-versa.

Parameters

copy http:

flash:

Address or name of remote host []: 10.16.206.77

Port number of the server [80]:

Source file name []: sample_file

User name to login remote host: x

Password to login remote host:

Destination file name [sample_file]:

Defaults None.

Command Modes EXEC

File Management