CLI Guide

Parameters

interface (OPTIONAL) Enter the following keywords and slot/port or

number information:

• For the management interface, enter the keyword

ManagementEthernet then the slot/port information.

The slot range is 0 and the port range is 0.

• For a 10 Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For VLAN, enter the keyword vlan then by a number

from 1 to 4094.

count value (OPTIONAL) Enter the keywords count then the count value.

The ranges from 1 to 65534. The default is Infinity.

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Usage Information

To stop packets from flooding the user terminal when debugging is turned on, use

the count option.

Example

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40:

debug ip packet

View a log of IP packets sent and received.

Syntax

debug ip packet [access-group name] [count value] [interface]

To disable debugging, use the no debug ip packet [access-group name]

[count value] [interface] command.

700

IPv4 Routing