CLI Guide

Parameters
name Enter the name of the host to delete. Enter * to delete all
host table entries.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
clear ip fib stack-unit
Clear all forwarding information base (FIB) entries in the specified stack unit (use this command with
caution, refer to Usage Information.)
Syntax
clear ip fib stack-unit unit-number
Parameters
unit-number Enter the number of the stack unit. The range is from 0 to 5.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes traffic disruption.
Related
Commands
show ip fib stack-unit — shows FIB entries.
696
IPv4 Routing