CLI Guide

Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command Modes INTERFACE VLAN
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information This CLI applies only to the Default VLAN.
To display information about a named VLAN, enter the show vlan command with
the name parameter or the show interfaces description command.
Related
commands
default vlan-id —Assigns a descriptive text string to the interface.
interface vlan — Configures a VLAN.
show vlan — Displays the current VLAN configurations on the switch.
show config (INTERFACE mode)
Displays the interface configuration.
Syntax
show config
Command Modes INTERFACE
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
show config (from INTERFACE VLAN mode)
Displays the current configuration of the Default VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes All Modes
684
Interfaces