CLI Guide

Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
commands
show vlan — Displays VLAN configuration.
feature fc
Enables the Fibre channel communication via the NPG functionality.
Syntax
feature fc
Command Modes CONFIGURATION
Default Enabled
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.6(0.0) Supported on the FN 2210S Aggregator and M I/O
Aggregator.
monitor interface
Monitor counters on a single interface or all interfaces on a stack unit. The screen is refreshed every five
seconds and the CLI prompt disappears.
Syntax
monitor interface [interface]
To disable monitoring and return to the CLI prompt, press the q key.
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the management port, enter the keyword
managementethernet followed by the slot (0) and the
port (0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a Port Channel interface, enter the keyword port-
channel followed by a number. The range is from 1 to
128.
Command Modes
• EXEC
• EXEC Privilege
Interfaces
681