CLI Guide

Field Description
Status States whether the interface is enabled (up) or disabled
(administratively down).
Protocol States whether IP is enabled (up) or disabled (down) on the
interface.
Description Displays the description (if any) manually configured for the
interface.
Example
Dell#show interface description
Interface OK Status Protocol Description
TenGigabitEthernet 0/1 NO admin down down
TenGigabitEthernet 0/2 NO admin up down
TenGigabitEthernet 0/3 NO admin up down
TenGigabitEthernet 0/4 NO admin up down
TenGigabitEthernet 0/5 NO admin up down
TenGigabitEthernet 0/6 NO admin up down
TenGigabitEthernet 0/7 NO up down
TenGigabitEthernet 0/8 YES up up
show interfaces stack-unit
Display information on all interfaces on a specific Aggregator stack member.
Syntax
show interfaces stack-unit unit-number
Parameters
unit-number Enter the stack member number (0 to 5).
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show interfaces stack-unit 0
TenGigabitEthernet 0/1 is down, line protocol is down
Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:05
Current address is 00:1e:c9:f1:00:05
Server Port AdminState is Down
Pluggable media not present
Interface index is 34148609
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :tenG130001ec9f10005
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Interfaces
651