CLI Guide

Parameters

seconds Enter the number of seconds the router must wait to

become the new querier. The range is from 60 to 300. The

default is 125 seconds.

Defaults 125 seconds

Command Modes INTERFACE

Supported Modes Programmable-Mux (PMUX)

Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Introduced on the M I/O Aggregator.

ip igmp query-interval

Change the transmission frequency of IGMP general queries the Querier sends.

Syntax

ip igmp query-interval seconds

To return to the default values, use the no ip igmp query-interval

command.

Parameters

seconds Enter the number of seconds between queries sent out. The

range is from 1 to 18000. The default is 60 seconds.

Defaults 60 seconds