CLI Guide

crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8 |
xor16}
• crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync
polynomial (default)
• crc16cc: Use CRC16_CCITT — 16 bit CRC16 using
CRC16-CCITT polynomial
• crc32MSB: Use CRC32_UPPER — MSB 16 bits of
computed CRC32
• crc32LSB: Use CRC32_LOWER — LSB 16 bits of
computed CRC32
• xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16 bit XOR
lag {crc16 |
crc16cc |
crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8 |
xor16}
Enter the keyword hg then one of the following options
available in the stack-unit and linecard provisioned devices::
• crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync
polynomial (default)
• crc16cc: Use CRC16_CCITT — 16 bit CRC16 using
CRC16-CCITT polynomial
• crc32MSB: Use CRC32_UPPER — MSB 16 bits of
computed CRC32
• crc32LSB: Use CRC32_LOWER — LSB 16 bits of
computed CRC32
• xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor1
• xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor2
• xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor4
• xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits
of CRC16-BISYNC and lower 8 bits of xor8
• xor16: Use CR16 — 16 bit XOR
hg-seed seed-
value
(This option is available in stack-unit and linecard
provisioned devices): Enter the keywords hg-seed then the
hash algorithm seed value. The range is from 0 to
2147483646.
stack-unit
number
(OPTIONAL) : Enter the keyword stack-unit then the stack-
unit slot number.
linecard number
(OPTIONAL) : Enter the keyword linecard then the linecard
slot number.
542
Equal Cost Multi-Path (ECMP)