CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show ip dhcp snooping
Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.
Syntax
show ip dhcp snooping [binding | source-address-validation]
Parameters
binding Display the interfaces configured with IP Source Guard.
source-address-
validation
Display the interfaces configured with IP Source Guard.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
clear ip dhcp snooping — clears the contents of the DHCP binding table.
show ipv6 DHCP snooping
Display the DHCPv6 snooping database.
Syntax
show ipv6 dhcp snooping
Defaults none
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL.
Example
Dell#show ipv6 dhcp snooping
IPv6 DHCP Snooping : Enabled.
Dynamic Host Configuration Protocol
537