CLI Guide

address Enter the IP address to clear the binding entry for a single IP

address.

conflicts Enter the keyword conflicts to delete all of the log

entries created for IP address conflicts.

server statistics Enter the keywords server statistics to clear all the

server counter information.

Defaults none

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information Entering <CR> after the clear ip dhcp binding command clears all the IPs

from the binding table.

debug ip dhcp server

Display the Dell Networking OS debugging messages for DHCP.

Syntax

debug ip dhcp server [events | packets]

Parameters

events Enter the keyword events to display the DHCP state

changes.

packet Enter the keyword packet to display packet transmission/

reception.