CLI Guide

Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
dcb pfc-shared-buffer-size
Configure the maximum amount of shared buffer size for PFC packets in kilobytes.
Syntax
dcb pfc-shared—buffer—size KB
Parameters
KB Enter a number in the range of 0 to 7787.
Default None.
Command Modes CONFIGURATION mode
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL platform.
Usage Information Configure the maximum shared buffer available for PFC traffic. You can choose to
increase or decrease the shared buffer that is allocated in the system by default.
Configure the shared buffer size less than the total PFC buffer size. If the buffer size
and DCB buffer threshold settings are applied on one or more ports, a validation is
performed to determine whether following condition is satisfied: If the shared
buffer size is more than the total PFC buffer size value, the configuration is not
saved and a system logging message is generated as follows:
Shared-pfc-buffer-size <= (Total-pfc-buffer-size — Σpfc priority <> buffer-size on
each port, priority).
Dell(conf)#dcb pfc-shared-buffer-size 2000
Data Center Bridging (DCB)
509