CLI Guide

11
Configuration Cloning
Configuration Cloning enables you to clone the configuration from one aggregator to the other. It
identifies a source aggregator where running configuration is check-pointed, extracted and downloaded
to the target aggregator for further use. The target aggregator checks the compatibility of the cloning file
regarding the mode, port types and optional modules. The target aggregator further takes care of the
conflicting configurations and appropriately proceeds with the application of the cloning configuration.
clone-config apply
Apply the cloning configuration file on the target aggregator.
Syntax
clone-config apply [file-name filename][output xml]
Parameters
apply Enter the keyword apply to apply the cloning
configuration.
file-name
filename
Enter the keywords file-name to specify the user-defined
cloning configuration file name in flash. By default, the file
name is cloning-config.
output xml Enter the keywords output xml to enable the command
output status to be displayed in the XML format.
Defaults cloning-config
Command Modes EXEC
Command History
Version Description
9.10(0.0) Introduced on the FN IOM and M I/O Aggregator.
clone-config check
Check the cloning configuration file compatibility with the current configurations on the target
aggregator.
Syntax
clone-config check [file-name filename][output xml]
Parameters
check Enter the keyword check to check the cloning
configuration compatibility.
440
Configuration Cloning