CLI Guide

clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform
BGP soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
* Clear and reapply an asterisk ( * ) for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the
AS. The range is from 0 to 65535 (2 Byte), from 1 to
4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
ipv4-neighbor-
addr | ipv6-
neighbor-addr
Clear and reapply policies for a neighbor.
peer-group name Clear and reapply policies for all BGP routers in the specified
peer group.
ipv6 unicast soft Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
out Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip bgp ipv6 unicast soft-reconfiguration
Enable soft-reconfiguration debugging for IPv6 unicast routes.
Syntax
debug ip bgp [ipv4-address | ipv6-address | peer-group-name]
ipv6 unicast soft-reconfiguration
436
Border Gateway Protocol IPv4 (BGPv4)