CLI Guide

Defaults none
Command Modes ROUTE MAP (config-route-map)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If the set community rt and soo are in the same route-map entry, the behavior
defines as:
• If the rt option comes before soo, with or without the additive option, soo
overrides the communities rt sets.
• If the rt option comes after soo, without the additive option, rt overrides
the communities
soo sets.
• If the rt with the additive option comes after soo, rt adds the communities
soo sets.
Related
Commands
set extcommunity rt — sets the extended community route origins using the route-
map.
show ip bgp paths extcommunity
To display all BGP paths having extended community attributes, use this feature.
Syntax
show ip bgp paths extcommunity
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The following describes the show ip bgp paths extcommunity command
shown in the following example.
Field Description
Address Displays the internal address where the path attribute is
stored.
Border Gateway Protocol IPv4 (BGPv4)
433