CLI Guide

6167 6167 6167 i
*>I 4.19.16.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.21.80.0/22 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.82.0/24 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.252.0/23 1.1.1.2 0 100 0 2914 701
6389 8063 19198 i
*>I 4.23.180.0/24 1.1.1.2 0 100 0 2914 3561
6128 30576 i
*>I 4.36.200.0/21 1.1.1.2 0 100 0 2914 14742
11854 14135 i
*>I 4.67.64.0/22 1.1.1.2 0 100 0 2914 11608
19281 i
*>I 4.78.32.0/21 1.1.1.2 0 100 0 2914 3491
29748 i
*>I 6.1.0.0/16 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.2.0.0/22 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.3.0.0/18 1.1.1.2 0 100 0 2914 701 668
i
show ip bgp summary
Allows you to view the status of all BGP connections.
Syntax
show ip bgp [ipv4 unicast] summary
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The following describes the show ip bgp summary command shown in the
following example.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table
version.
Border Gateway Protocol IPv4 (BGPv4)
425