CLI Guide

D 70.70.22.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.23.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.24.0/24 100.10.10.2 0 0 100 200 ?
*> 70.70.25.0/24 100.10.10.2 0 0 100 200 ?
*> 70.70.26.0/24 100.10.10.2 0 0 0 100 200 ?
*> 70.70.27.0/24 100.10.10.2 0 0 0 100 200 ?
*> 70.70.28.0/24 100.10.10.2 0 0 0 100 200 ?
*> 70.70.29.0/24 100.10.10.2 0 0 0 100 200 ?
Dell#
Example (denied-
routes)
Dell#show ip bgp neighbors 100.10.10.2 denied-routes
4 denied paths using 205 bytes of memory
BGP table version is 34, local router ID is 100.10.10.2
Status codes: s suppressed, S stale, d damped, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
D 70.70.21.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.22.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.23.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.24.0/24 100.10.10.2 0 0 100 200 ?
Dell#
Related
Commands
show ip bgp — views the current BGP routing table.
show ip bgp next-hop
View all next hops (using learned routes only) with current reachability and flap status. This command
only displays one path, even if the next hop is reachable by multiple paths.
Syntax
show ip bgp next-hop
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The following describes the show ip bgp next-hop command shown in the
following example.
416
Border Gateway Protocol IPv4 (BGPv4)