CLI Guide

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To remove all configured debug commands for BGP, enter the no debug ip bgp

command.

debug ip bgp soft-reconfiguration

Enable soft-reconfiguration debug.

Syntax

debug ip bgp {ip-address | peer-group-name} soft-

reconfiguration

To disable, use the no debug ip bgp {ip-address | peer-group-name}

soft-reconfiguration command.

Parameters

ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted

decimal format.

peer-group-name (OPTIONAL) Enter the name of the peer group to disable or

enable all routers within the peer group..

Defaults Disabled