CLI Guide

stale-path-time
seconds
Enter the keyword stale-path-time then the maximum
number of seconds to wait before restarting a peer’s stale
paths. The default is 360 seconds.
role receiver-only Enter the keyword role receiver-only to designate the
local router to support graceful restart as a receiver only.
Defaults as above
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
This feature is advertised to BGP neighbors through a capability advertisement. In
Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.
BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
In Non-Deterministic mode, paths are compared in the order in which they arrive.
This method can lead to the system choosing different best paths from a set of
354
Border Gateway Protocol IPv4 (BGPv4)