CLI Guide

• L2AclCam
• V6AclCam
The following describes the output fields of this show command:
Field Description
LineCard Number of the line card that contains information on ACL
VLAN groups
Portpipe The hardware path that packets follow through a system for
ACL optimization
CAM-Region Type of area in the CAM block that is used for ACL VLAN
groups
Total CAM space Total amount of space in the CAM block
Used CAM Amount of CAM space that is currently in use
Available CAM Amount of CAM space that is free and remaining to be
allocated for ACLs
Example:
Dell#show cam-usage
Stackunit|Portpipe|CAM Partition|Total CAM|Used CAM|
AvailableCAM
========|========|==============|=========|========|========
0 | 0 | IN-L3 ACL | 512 | 1 | 511
| | IN-V6 ACL | 0 | 0 | 0
| | IN-L2 ACL | 512 | 0 | 512
| | IN-NLB ACL | 256 | 0 | 256
| | IPMAC ACL | 0 | 0 | 0
| | OUT-L3 ACL | 158 | 6 | 152
| | OUT-V6 ACL | 158 | 1 | 157
1 | 0 | IN-L3 ACL | 512 | 1 | 511
| | IN-V6 ACL | 0 | 0 | 0
| | IN-L2 ACL | 512 | 0 | 512
| | IN-NLB ACL | 256 | 0 | 256
| | IPMAC ACL | 0 | 0 | 0
| | OUT-L3 ACL | 158 | 6 | 152
| | OUT-V6 ACL | 158 | 1 | 157
Codes: * - cam usage is above 90%.
Dell#
show running config acl-vlan-group
Display the running configuration of all or a given ACL VLAN group.
Syntax
show running config acl-vlan-group group name
Parameters
group-name
Display only the ACL VLAN group that is specified. The
maximum group name is 140 characters.
322
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)