CLI Guide

The following sample output shows the line-by-line style display when using the
show acl-vlan-group detail option.
NOTE: No group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module
platform.
Usage Information After CAM configuration for ACL VLAN groups is performed, you must reboot the
system to enable the settings to be stored in nonvolatile storage. During the
initialization of CAM, the chassis manager reads the NVRAM and allocates the
dynamic VCAP regions.
The following table describes the output fields of this show command:
Field Description
Chassis Vlan Cam
ACL
Details about the CAM blocks allocated for ACLs for various
VLAN operations at a system-wide, global level.
Stack Unit
<number>
Details about the CAM blocks allocated for ACLs for various
VLAN operations for a particular stack unit.
Current
Settings(in block
sizes)
Information about the number of FP blocks that are
currently in use or allocated.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
319