CLI Guide

route-map
Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
Syntax
route-map map-name [permit | deny] [sequence-number]
Parameters
map-name Enter a text string of up to 140 characters to name the route
map for easy identification.
permit (OPTIONAL) Enter the keyword permit to set the route
map default as permit. If you do not specify a keyword, the
default is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map
default as deny.
sequence-
number
(OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit
action is the default.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module
Usage Information Use caution when you delete route maps because if you do not specify a sequence
number, all route maps with the same map-name are deleted when you use the no
route-map map-name command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related
Commands
show config2 — displays the current configuration.
Access Control Lists (ACL)
233