CLI Guide

Related
Commands
mac access-list standard — configures a standard MAC ACL.
mac access-list extended — configures an extended MAC ACL.
show mac access-lists
Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface,
and the count of matches/mismatches against each ACL entry displayed.
Syntax
show mac access-lists [access-list-name] [interface interface]
[in | out]
Parameters
access-list-name Enter the name of a configured MAC ACL, up to 140
characters.
interface interface Enter the keyword interface then the one of the
following keywords and slot/port or number information:
• For a Port Channel interface, enter the keywords port-
channel
and then enter a number. The range is from 1
to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
• For a VLAN interface enter the keyword VLAN and then
the vlan id.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show mac accounting access-list
Display MAC access list configurations and counters (if configured).
Syntax
show mac accounting access-list access-list-name interface
interface in | out
206
Access Control Lists (ACL)