CLI Guide

409 SERVERPORTPHYEXTLINKTEST Interactive
410 CPUSNAKESFPPEXTLPBKTEST Interactive
Total Diagnostic Testcases in Interactive: 8
************** END ***********************
Dell#
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax
show hardware stack-unit 0 {buffer [ unit 0 ] total buffer |
buffer unit 0 interface all queue [(0-14) | a11] buffer-info}
{cpu {data-plane statistics | management statistics | private-
mgmt statistics} | drops [unit 0-0 | fpga registers | fru dump
| stack-port 9-12 | unit 0-0 {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump
WORD}}
Parameters
stack-unit 0
{command-
option}
Enter the keywords stack-unit then 0 to select the stack
member and then enter one of the following command
options to display a collection of data based on the option
entered.
buffer Enter the keyword buffer. To display buffer statistics for a
all interface, enter the keyword interface followed by the
keyword
all. To display the forwarding plane statistics
containing the packet buffer usage per port per stack unit,
enter the keyword unit then 0 for port-pipe 0, then port
and the port number (42-53, and then buffer-info.
cpu {data-plane
statistics |
management
statistics | private-
mgmt statistics}
Enter the keyword cpu then one of the keywords to display
the CPU statistics: data-plane statistics,
management statistics, or private-mgmt
statistics.
drops interface
interface
Enter the keyword drops to display internal drops on the
selected stack member.
fpga registers Enter the keywords fpga registers to display fpga
details.
fru dump Enter the keywords fru dump to display fru details.
stack-port 9-12 Enter the keywords stack-port and a stacking port
number to select a stacking port for which to display
statistics. Identify the stack port number as you would to
1582
Debugging and Diagnostics