CLI Guide

hardware watchdog
Set the watchdog timer to trigger a reboot and restart the system.
Syntax
hardware watchdog
Defaults Enabled
Command Modes
• CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
This command enables a hardware watchdog mechanism that automatically
reboots an Dell Networking OS switch/router with a single unresponsive unit. This
is a last resort mechanism intended to prevent a manual power cycle.
online stack-unit
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number Enter the stack-unit number. The range is from 0 to 5.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
1578
Debugging and Diagnostics