CLI Guide

clear counters vrrp
Clear the counters maintained on VRRP operations.
Syntax
clear counters vrrp [vrrp-id]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The
range is from 1 to 255.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
NOTE: This command also enables you to clear the port configurations
corresponding to a range of ports.
• You can specify multiple ports as slot/port-range. For example, if you want to
clear the port configurations corresponding to all ports between 1 and 4,
specify the port range as clear counters interfaces interface-type
1/1 - 4.
debug vrrp
Allows you to enable debugging of VRRP.
Syntax
debug vrrp interface [vrrp-id] {all | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
packets | state | timer} command.
Parameters
interface Enter the following keywords and slot/port or number
information
• For Port Channel interface types, enter the keywords
port-channel then the number. The range is from 1 to
128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
1536
Virtual Router Redundancy Protocol (VRRP)