CLI Guide

65
Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking Operating System (OS) for
IPv4 and IPv6.
The following commands apply to both VRRP IPv4 and IPv6:
• advertise-interval
• description
• disable
• hold-time
• preempt
• priority
• show config
• track
• virtual-address
VRRP Ipv6 are in the VRRP for IPv6 Commands section.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs}
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter a number of seconds. The range is from 1 to 255. The
default is 1 second.
centisecs
centisecs
Enter the keyword centisecs followed by the number of
centisecs in multiple of 25 centisecs. The range is 25 to
4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs
Command Modes INTERFACE-VRRP
Supported Modes Full–Switch
1534
Virtual Router Redundancy Protocol (VRRP)