CLI Guide

Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface interface Restricts the debugging information to an interface.
Defaults Disabled
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
dot1x authentication (Configuration)
Enable dot1x globally. Enable dot1x both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on a globally, use the no dot1x authentication command.
Defaults Disabled
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
dot1x authentication (Interface) — Enables dot1x on an interface.
dot1x authentication (Interface)
Enable dot1x on an interface. Enable dot1x both globally and at the interface level.
Syntax
dot1x authentication
150
802.1X